Видео

2024: Buy a Bambu Lab 😂😂😂

Yep! The music is dreadful. I can't watch this. It's such a shame: you seem confident and knowledgeable. It's great that you want to help beginners, but have the confidence to just teach. We'll watch if we want to learn.

Dude thank you so much I wish I looked at this video right away You deserve a sub

I know it’s been 4 years but THANK YOU SOOOO MUCH MY TF CARD READER BROKE SO I WATCHED YOUR VIDEO AND DID IT OVER USB THANK YOU!

Does calibrating a 3D printer with paper apply to all types of lbm printers?

Some nice simple slicing software. What the current open source slicing software for PC?

What is the current affordable fdm printer?

Bravooooooooooooooooooooooooooooooooooooo

Could you plz give me a direct link to your Discord? I can't acces your site

6 years later i got a free crs10 and used this for reference on the setup. Thanks a ton for the help

How con I control de extrude motor in cura?

This guy really loves hearing his own voice. So many unnecessary things mentioned and drawn out steps. This could have been done in half the time. I found myself skipping a bunch of it. 🥵 Jeezus 🤦‍♂️

thanks

I'd like to know everything else you had to install before being able to run over USB. Like OpenSCAD...

I'm stuck with how I download the item from thingy verse and send it to the slicer I downloaded pursa and my printed is an ender 3 any advice on those stepz but actually showing someone doing it step by step because I'm not understanding it? Not so computer smart 😢

So you never showed how to create slice one file, but not imported tho.

Don't do this unless you want to fry usb ports on your motherboard like this printer just did to my $400 motherboard.

Came to this video in 2024 because i want to start a business around 3d printing

I want to print multi layer, multi color items. An example would be a license plate for kids bike. I want basic color background, want a layer on top with the name and an edge around the perimeter. That would be a 2 color print. If I can do that, I can figure out how to make a 3 & 4 layer object as well. Thanks

You fixed my printer..thank you!!

This was really interesting. It's hard to believe this video hasn't got any more traction than it has. It's a worthwhile watch.

Problem is my printer is not showing up in cura! under printers. my model is not visible

I continue to pop error codes directly out of the box. I was able to print the test boat just fine. After two small test prints off of thingiverse, I can't print anything else. I get "nozzle heating not as expected" and "Key:3000 unknown exception" I've had this model for two weeks. It will pass the self tests, but continues to pop the Key:3000 nozzle heating not as expected" This is my first printer and I'm at a loss. The creality website has 4 error codes, and nothing related to this issue. Any thoughts would be greatly appreciated!

can I change or in/out material to ultimaker 2 with this methot too?

awesome ty

I am still a little confused about what I need to get started. I want to create a Zombie Scene on my Lionel Train Layout and thought maybe I could make them. I need them to be about 38mm tall. Is it hard to print something that small but have some detail so I can paint them. I don't have anything, so I would need to get everything and is that expensive?

This video was exactly what I needed right. We'll be getting started in the fall. Thank you

Ya conecte mi impresora 3d a la computadora pero no la reconoce, que puedo hacer para que la reconosca

Great video, for this newbie.

Hello

can you help me plese, my driver print 3D CR-10 andefine me to remove that. can i download driver couse web suport is not available it? or can i ask you for help me give copy your driver print 3D CR 10?

I use an up plus 2, but it doesn't show up when connected through usb...

My printer goes crazy when I hook up a USB to it

This was the video I needed I could not see how to work this bah. Thnak you.

😅little drum boy king county

Nice video. the background music if distracting and too loud.

will this work for any 3d printer

Thank You for your videos. I am in a wheelchair and I am looking to see if I can make an 3D print of my booster box that I set on with my 14" wide cushion on to top that had a drawer in the middle for things. But I worry about if it is possible with me sitting on. I am about 98lbs or less.

What comes after

awesome video for newbies to 3D printing

Bro, I'm not gonna design a printer...just get to the point, prices and different advantages and disadvantages to prices...what are you going to do explain how laser works?...that's a different video if you're a talker..I want to buy a 3D printer, that's why I'm here..

This video really didn't age well. Either that or it wasn't good to begin with. A steel nozzle is only a good idea if you are using abrasive filaments with stuff embedded in them. Otherwise, they have worse heat transfer which can impact print quality. Do yourself a favor and get a bag of 30 brass nozzles on Temu for $6. If it's worn, clogged, or crashed into the bed, just replace it. Also, don't bother with capricorn snake oil tubing... just get a bi-metal heat break. Only costs a little more, but it's not a wear item and actually fixes the problem. I'm not sure if those smoothers actually work, but I wouldn't use them. The rest isn't bad. Obviously there is new stuff... do klipper firmware with MainSail or Fluidd instead of octoprint so many benefits to klipper. BL touch if you don't have it is great. BTT makes great boards for a decent price. Rails are all the rage now too.

I have an invention that I have created on paper and in my mind and I'm looking to make a prototype using a 3D printer I'm going to watch all of your videos and hopefully learn how to make my prototype in a way that will wow My target investors and manufacturers

The music is very distracting. Tutorials don’t need a soundtrack. I had to bail after 3 minutes. Why make it harder on the listener?

Thanks for the content

I'm applying for a Libra job that requires 3d printer knowledge. This is one of the only videos I have found that actually goes through the logical process. Thank you!

I have tried to print via usb on my SUNLU S8 printer but it will start out good then it will just randomly pause for a few moments then start back up leaving a puddle of filament at that spot. Sometimes it will just stop all together I have tried every setting as far as baud rate and made sure that it was set for the proper speed but no luck. I have tried it with Repetier Host as well as Cura. Tried new USB cables and all but no luck. Will only complete the print via SD card with no problems. Can't find any topics about this problem. What do you think?

Good explanation. But quite useless power consumption to run PC only for printing. This easily doubles the power consumption of the 3D print. Probably better to use Raspberry Pi with OctoPi or similar.

thank you so much

You're a pro.